How To Change Cabin Filter 2002 Corolla

This pictorial guide walks you through the steps of replacing the cabin air filter in your 2003-2008 Toyota Corolla. The motel air filter should be inverse every half-dozen-18 months, depending on the types of environments you typically drive in. According to the vehicle maintenance schedule, this should be performed every 30,000 miles. Go a printable pdf version of the maintenance schedule here.

Note: if you lot purchase something through one of our affiliate links we may earn a commission, at no extra cost to you.

The cabin air filter is actually straightforward to alter out, and will usually take betwixt 10-twenty minutes.

Tools and Supplies:

Phillips Screwdriver
2009-2019 Toyota Corolla – Motel Air Filter (CF10285)
2002-2008 Toyota Corolla/Matrix – Cabin Air Filter (CF10133)

The motel air filter is accessed through the glove box, then the commencement step is to remove it. To exercise this, go in through the passenger'southward side door, and open the glove compartment.

Adjacent we will remove the glove box. In gild to do so, locate the retaining arm on the right-manus side of the box. It is held in identify with a Phillips spiral.

Utilize a Phillips screwdriver to remove the screw and gently pull the retaining arm off of the plastic connector.

Now the glove compartment is held in by the friction of the retaining tabs on both sides. You lot need to press the two sidewalls of the glove-box inward in order to permit the glove compartment swing down.

In one case the two tabs are free of the walls, the entire glove-box will swing downwards, and you can pull information technology out toward you, gently. It is now gratuitous of the vehicle. Set it aside.

Now, locate the cabin air filter cover. Looking into the area where the glove compartment was previously, the cover is the black rectangular piece.

It has tabs on both sides of it that will demand to exist released.

Press inward on the tabs and pull gently to release the cover.

The cover will come off, revealing the sometime filter. Set the encompass bated.

Pull out the old filter. If you waited too long to supersede information technology, like I did, it will be covered in droppings, then pull it out slowly to minimize the amount of droppings that falls down into the fan.

At present that the old filter is removed, information technology would probably be a good idea to use a vacuum and a small hose to clean out any droppings that may accept fallen downward into the fan. If you hear a 'flutter' when the cabin fan is turned on, there is a chance that something like a foliage has fallen down in in that location, and is brushing against the fan blades. Vacuum all of that out.

Here is a picture of the sometime and new cabin air filters adjacent.

These are the filters I recommend:

2009-2019 Toyota Corolla – Cabin Air Filter (CF10285)
2002-2008 Toyota Corolla/Matrix – Cabin Air Filter (CF10133)

Corolla-Cabin-Air-Filter-Correct-Orientation

Now put in the new filter in exactly as the old one was. Make sure you become the orientation of the new filter correct. I have seen alien information about this, depending on if the filter is indicating period direction (which is down in this case), or if the arrow is indicating "this side up". Different filter makers appear to have different conventions. In the majority of cases, the correct orientation is for the arrow to be pointed in the management of the airflow, which in this example is pointing Down.

cabin air filter orient arrow down — Cabin Air Filter orientation

The filter may feel like information technology is sticking out a little bit, this is normal, since the cover has a slot in information technology for the filter to protrude into.

Next, put the cover back on, and press the plastic tabs on both sides into the slots until they click.

Now nosotros can put the glove compartment back in. Line up the plastic hinges on the lesser, and gently button them together. This is what they look similar, and how they fit together.

Once the hinges are aligned, swing the glove-box upward and press it inward, until the tabs on the sides snap back into identify backside the plastic walls.